The single-head tube winding machine, also known as the magnesium rod winding machine, uses the automatic pitch adjustment function of the machine to wind the heating wire evenly or unevenly around the magnesium rod, thus achieving the production of heating tube products. This device is equipped with a bilingual (Chinese and English) display screen and can also be customized according to customer requirements.
Product composition：
1. Motor: servo motor
2. Control system: winding control system with independent intellectual property rights
3. Touch screen language: Chinese or Engish
Main parameters：
1. Voltage: AC220V
Power: 400W
2. Effective travel:700mm
3. Maximum width:1.5-25mm
4. Winding speed: 1-10 rpm
5. Touch screen:Xinjie 7 inches
6. PLC:Xinjie
7. Remote module:Xinjie
8. Tensioner:ZX3YN hollow magnetic powder brake
9. Winding mode:single or twin-wire
10. DC power24V:shenzhen mingwei
11. Servo motor: Pufield 400W
12. Stepper motor:57 stepper motor
13. Y-axis lead screw1:5mm
Z-axis lead screw1:4mm
14. T-shaped guide rail:4
Touchscreen description：
1. After powering on and turning on the machine, press the red button. The home page is for language selection. Select the language you need, such as Chinese, English.
2. Settings page.：
1) To set the origin of the Y-axis: Click left shift or right Shift to adjust the starting point. After adjustment, click to set the Y-axis origin for about 3 seconds. If it shows 0, the setting is complete.
2) Rotational speed: It indicates the speed at which the heating wire is wound. Adjust according to the actual situation. The maximum should not exceed 7,000. When the number of laps is small, the speed should be reduced to 500-1,000.
3) Z-axis setting position: Indicates the length of the magnesium rod.
4) Z-axis start and reset: Used to adjust the position of the axis that fixes the magnesium rod.
3. Production page：
1) Wire diameter: It indicates the diameter of the heating wire wound. After inputting the diameter, the system automatically displays the resistance of the heating wire.
2) Total resistance: Indicates the total resistance required.
3) Magnesium rod diameter and length: Indicates the diameter and length of the magnesium rod to be wound.
4) The total number of turns, the total length of the heating wire and the pitch will be automatically calculated by the system.
5) Length: Set according to user requirements, and the number of turns is automatically calculated by the system. As shown in the following figure, the magnesium rod is 198mm in length and can be divided into two sections: the first section is wound from dense to sparse, the second section is wound evenly, and the last section is wound from sparse to dense. Or, input the total length of 198mm in the second section and 0 in the first and third sections to achieve uniform winding of the entire section.
6) Reset time: It indicates that the magnesium rod will automatically return to the starting point a few seconds after winding is completed. Click to enable or disable it according to the user's requirements.
7) WIFI Settings: Click on WIFI to enter the Settings page and search for WIFI. Enter the WIFI password and save it. This setting enables remote control and software upgrades.
8) All Settings are completed in manual mode, and the device needs to be started in automatic mode.
